HELP WITH CRYSIS PLEASE

Joined: May 26, 2007 Posts: 104 Location: gosport hants

hi all

i have a problem with crysis. i have got a AMD athlon 4400x2 duelcore cpu. 2gig of ram. BFG geforce 9800GTX graffics card and im running vista ultimate 32bit. but i still get bad lag on the game. can any one advise me on what the problem may be as i thought my setup would be more then ok for this game.

thanx

|2es-brianuk1

Community Founder Joined: Jun 30, 2005 Posts: 3392

Quote:

2gig of ram

Thats a major drawback with running Vista and Gaming... you really do need 4gb of ram

cheers
|2es-mrix
p.s what settings are you trying to achieve in the game Question

Joined: Aug 12, 2008 Posts: 22

had the same probs...
make sure your drivers are upto date.
make sure you are not running the driver vista downloads for your vid card.
it caused me nothing but probs.
and also, verify whether you are running DX10 or Dx9.
i had issues with 9...

goodluck

*also, 4 gigs in vista is necc, even though only 3.2or so will be used.

thanks Bill...you f+++ing rich slacker!
fix that shit1!

Posted: Wed Aug 13, 2008 5:55 pm

dont even bother trying to run dx10. i have quad core cpu, 4 gig ram & 8800gt oc card, and cant run it properly in dx10. hardly any difference between the 2 settings anyway.

Joined: Jul 01, 2005 Posts: 629 Location: Watching You

With 2 gig of ram that will destroy your performance i would amagine since vista itself uses over 1 gig when your running no other programs.

Posted: Wed Aug 13, 2008 8:13 pm

found this mod for crysis. 'crysis natural mod' looks nice. i've installed it but not tried it yet. http://www.fileplanet.com/184611/180000/fileinfo/Crysis---Natural-Mod-2.0.2 supposed to look more realistic but no more taxing on pc. maybe a little less taxing according to what i've read
looks stunning though. http://www.vimeo.com/748442

Joined: May 26, 2007 Posts: 104 Location: gosport hants

hi all

the settings im running mrix is very high as i thought my set up would be ok.
allso ive noticed that when i change all the settings to very high you cant change the setting for detail to very high it stays a grey couler and its set to high only. why is this?

thanx

|2es-brianuk1

Posted: Wed Aug 13, 2008 8:41 pm

if you can get the very high settings then your running game in dx10 as the highest setting in dx9 is high. you'll need at least 1 8800gtx to run dx10 mate. switch to dx9 and set everything to high and you should be fine. there is a way of putting settings in dx9 to very high, it involves accessing the config files and making some changes.
http://www.tweakguides.com/Crysis_1.html

Joined: May 26, 2007 Posts: 104 Location: gosport hants

im running a BFG geforce 9800GTX would that not be better then the 8800GTX??? ow and thanx |2es-roguesamuri007 for the mod it works great it looks really nice and plays as sweet as a nut give it a try i think you will be most inpressed.

Posted: Thu Aug 14, 2008 12:05 am

your card should be better i think. i'm not up on the new 9000 cards. i know some are not as good as some of the 8000 cards but yours should be. prob your ram thats holding you back then. whats it play like in dx9? there's hardly any difference in the graphics. follow the tweakguide and you'll have extra high settings too. but if you can i'd stick another 2 gig of ram in. you can get good fast ddr2 ram now for cheap. i've got crucial ballistix pc8500,a 2 gig set is less than £50 now. i've got 4 gig. got it from

Posted: Thu Aug 14, 2008 1:11 pm

This stuff is really good and cheap - 2gb @ £30.54 inc VAT

http://www.overclockers.co.uk/showproduct.php?prodid=MY-058-GL&groupid=701&catid=8&subcat=&name=GeIL%202GB%20(2x1GB)%20PC2-6400C4%20800MHz%20Ultra%20Low%20Latency%20DDR2%20Dual%20Channel%20Kit%20(GX22GB6400UDC)

85.236.100.27:12687